|
 ATMET is special in manufacturing dunnage bag set up in 1995, which is the first manufactory in China. Our consumer is all over the world for example America , Europe, Aficia, and so on. How to choose the right dunnage bag to fill in the gap between the goods and container? If you have confuse in choosing ,you can contact us directly. We are ready to serve for you in handling the questions.
Here is the instruction:
1. In general, how to choose the suitable dunnage bag? the length should be that the length of gap to fill in need to decrease 10 cm to 40 cm.
2. The use step: first, put the bag into the gap, then begin inflate, not too much just enough to fill in. because when the temperature rise up to 70℃, inflating too much could cause the bad result during the ocean shipping
3. The end of dunnage bag should avoid touching the floor board, in case friction between the bag and container cause leaking during the carrying
4. Protect bag from directly touching any edge or speculate area.
5. If the gap is too wider to use the bag in hand to fill in, you could put the goods in the center and put the bags in both sides of the goods. How to judge the inflating enough? One way : you can see the pallet begin to move or not, if move, it’s enough; the other: try to put hand into the gap between goods and bags, if you feel difficult, it’ enough. But choose the right bag is most important.
6. After inflating, be sure the cover is screwed down. Meanwhile
7. Use the metal gun special in inflating we offered. Prohibit taking the cover off because the air flow under high pressure may damage the inside and cause leaking
If you are interested in our product , please don’t hesitate in contact us.
|
